IC-F2000T Transreceiver ICOM UHF
Land Communication
Features:
128 Channels
3 or 7 Programmable Keys
8 Character Display
Waterproof Li-Ion Battery & Rapid Charger Included
Full Keypad
1,500mW Loud Crystal Clear Audio
Rugged & Waterproof
Built-in Scrambler
Repeater Capable
PC Programming Setup
Introduction
The IC-F2000T is a new compact portable radio series with convenient features such as a built-in motion sensor, channel announcement function, loud audio and a rugged waterproof & dustproof chassis. The radio is ideal for a wide range of businesses such as those involved in the education, hospitality, retail, and facility management sectors. IP67 Waterproof and Dust-tight Protection.
Features:
Compact size Icom 16 Channels for IC-F2000T
128 Channels for IC- 2000T
IP67 Waterproof and dust-tight protection
Enhanced Emergency with built-in motion sensor
Easy to hear in noising environment
inversion voice scrambler
14 hours of operating time with supplied waterproof battery (with BP279)
Quiet stand-by mode with built in 2-tone, 5-tone
CTCSS and DTCS Icom
MDC 1200 compatible
Channel announcement
8 DTMF autodial memories
"Shift key” function increases number of programmable key assignments
Specifications
| Frequency coverage | 400–470 MHz (ALL) 450–512 MHz (USA) 450–520 MHz (EXP) |
| Number of channels | 128 channels/ 8 zones |
| Type of emission | 16K0F3E*/11K0F3E (USA/EXP) 16K0F3E/14K0F3E/8K50F3E (EUR) |
| Power supply requirement | 7.5V DC nominal |
| Current drain(approx.) | Tx 1.3A Rx 500 mA /80 mA(Max. audio (internal SP)/Standby) |
| Antenna impedance | 50Ω |
| Operating temperature range(Radio specification) | –30°C to +60°C; –22°F to +140°F (Radio specification)(USA/EXP) –25°C to +55°C (Radio specification)(EUR) |
| Dimensions(W × H × D; Projections not included) | 52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in (With BP-279) |
| Weight (approx.) | 240 g; 8.5 oz (With BP-279) |
Transmitter
| Output power(Hi, L2, L1) | 4 W, 2 W, 1 W |
| Maximum frequency deviation | ± 5.0 kHz (25 kHz)*, ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) |
| Spurious emissions | 70 dB minimum (USA/EXP) 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR) |
| Frequency stability | ±2.5ppm |
| Audio harmonic distortion | 1.0% typical (25/20 kHz), 1.5% typical (12.5 kHz)(at AF 1 kHz 40% deviation) |
| FM Hum and Noise(without CCITT filter) | 46 dB typical (25 kHz), 40 dB typical (12.5 kHz)(USA/EXP) |
| Residual modulations(with CCITT filter) | 53 dB typical (25 kHz), 51 dB typical (20 kHz), 48 dB typical (12.5 kHz)(EUR) |
| External microphone connector | 3-conductor 2.5 (d) mm (1/10)/2.2 kΩ |
Receiver
| Sensitivity | (at 12dB SINAD) 0.25μV typical (at 20dB SINAD) –4 dBμV typical emf |
| Adjacent channel selectivity | 73 dB typical (25 kHz),56 dB typical (12.5 kHz)(TIA-603D) 74 dB typical (25 kHz),64 dB typical (12.5 kHz)(TIA-603A) 73 dB typ. (25 kHz), 73 dB typ. (20 kHz), 56 dB typ. (12.5 kHz)(EUR) |
| Spurious response rejection | 70dB minimum |
| Intermodulation rejection | 73 dB typical (USA/EXP) 67 dB typical (EUR) |
| Hum and noise(With CCITT filter) | 49 dB typical (25 kHz), 43 dB typical (12.5 kHz) (USA/EXP) |
| Hum and noise(Without CCITT filter) | 52 dB typical (25 kHz), 50 dB typical (20 kHz), 47 dB typical (12.5 kHz)(EUR) |
| AF output power(at 5% distortion) | Internal SP 1500 mW typical (With 8Ω load) External SP 400 mW typical (With 8Ω load) |
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8)/8 Ω |