+977(0)14383043; +977(0)14381281 Samakhusi, Kathmandu Metropolitan, Nepal bishnu@decadeint.com

IC-F4261D-UL Transreceiver ICOM UHF

5 W Output Power Digital Radio for Hazardous Locations, IP-67, MIL-STD-810-C, -D, -E and -F, The IC-F3261D-UL/F4261D-UL series can be used in Class I, Division 2, Group A, B, C and D hazardous locations approved by UL (Underwriters Laboratories). A full 5 W of output power is available with this approval. Other safety features such as man down, lone worker and emergency call functions help your team remain connected in hazardous locations. Accessories with BP-232UL 2350mAh, MB-94R, FA-SC57U

-Nonincendive: Class I, Division 2, Groups A, B, C, D

-Multiple operating modes (Available mode depending on version)

    • NXDN™ conventional and Type-D trunking

    • dPMR™ conventional and Mode 3 trunking

    • Analog FM

-Man down and lone worker functions

-IP67 dust-tight & waterproof

-800 mW (typ.) audio output

-Full dot-matrix display, rotary channel and volume knob for simple every-day operation

Product Introduction

The IC-F3261D-UL/F4261D-UL series provides 5 W output power and can be used in Class I, Division 2, Group A, B, C and D hazardous locations approved by UL (Underwriters Laboratories). The radios with man down, lone worker and emergency call functions help your team remain connected even in hazardous locations.






General Features

  • 136–174, 350–400, 400–470, 450–512, 450–520 MHz versions 

  • 512 Channels / 128 Zones

  • Full dot-matrix display with status icons

  • Backlit LCD and buttons

  • 16-position rotary selector and ON/OFF volume knob

  • 800 mW loud and intelligible internal speaker audio

  • 1000 mW audio from optional HM-184UL speaker-microphone

  • MIL-STD-810 G shock, vibration, temperature and more

  • IP67 dust-tight and waterproof, one meter for 30 minutes

  • DTMF autodial memories

          More features includes

          IP67 Dust-tight & Waterproof Protection   

          The IC-F3261D series provides rugged protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

          Man Down and Lone Worker Functions for Emergency Call

          The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatcher to any potential trouble.


          800mW (typ.) Audio Output Power    

          The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

          Built-in GPS Receiver

          Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.
          *Depending on the version.
          *To show the received position data, an external PC application is required.

          14-pin Accessory Connector

          The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speaker - microphone provides a 1000mW (typ.) audio output for loud and clear communication.


          Large Full Dot-Matrix LCD

          Using a large full dot-matrix LCD (32 × 18mm), the IC-F3261D series shows two lines of easy to read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

          Long Lasting Battery Life Digital mode Analog mode
          Built-in GPS type         10.5 hours (approx.) 11 hours(approx.)
          Non GPS type         12 hours (approx.) 12.5 hours(approx.)

          IDAS Features

          The IC-F3261D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with NXDN™ Type-D multisite trunking. The following IDAS features are programmable.

          -Individual/group call
          -Individual ID and talkgroup ID memories
          -Status message
          -SDM (Short Data Message)
          -GPS
          -Stun, kill and revive
          -Radio check
          -Remote monitor
          -Call alert
          -Call log
          -Emergency
          -Digital voice scrambler
          -Block decode
          -RAN (Radio Access Number)
          -Built-in 2-Tone and 5-Tone*
          -2-Tone and 5-Tone signalings give you Selective calling, quiet stand-by and other convenient functions. The radio stun and kill functions disable a radio over the air and the revive function restores the stunned radio.


          Specifications

          Frequency coverage
          136–174 MHz
          400–470 MHz
          450–512 MHz
          Number of channels
          512 channels/128 zones
          Channel spacing
          12.5/6.25kHz
          Type of emission
          11K0F3E/4K00F1E/F1D
          Current drain(approx.)
          Tx High (at 5W)   1.8A
          Rx             Rated output 550mA
          Standby   160mA
          Dimensions (W×H×D) (projections not included)
          53.5×142.7×39.5 mm;2.11×5.62×1.56 in(With BP-232WP)
          Weight (approx.)
          400g; 14.1oz(With BP-232WP, MB-94R & FA-SC57U)
          Transmitter
          RF output power (at 7.5V DC)
          5W, 2W, 1W(Hi, L2, L1)
          Spurious emissions
          78dB typ.
          Frequency stability
          ±1.0ppm
          Audio harmonic distortion
          1.5% typ. (AF 1kHz 40% deviation)
          FM Hum and Noise
          40dB typ. (Narrow)
          FSK error
          2.0% typ.



          Receiver
          Sensitivity

          Analog        0.23μV typ. (at 12dB SINAD)
          Digital     0.20μV typ. (at 5% BER)    

          Adjacent channel selectivity
          68/60dB typ. (Narrow, digital)
          Spurious response rejection
          76dB typ.
          Intermodulation rejection
          75/66dB typ. (Narrow, digital)
          AF output power(at 5% distortion)

          800mW typ. (Internal SP, 12Ω load)
          1000mW typ. (External SP, 8Ω load)