+977(0)14983043; +977(0)14981281 Samakhusi, Kathmandu Metropolitan, Nepal bishnu@decadeint.com

Mimosa B11 backhaul radio 10-11GHz, 27dBm, 1.5Gbps

10-11 GHz, 27 dBm, 1.5Gbps capable PTP backhaul with GPS Sync, connectorized includes PoE Injector 56V

  Fiber Ready
• Precision Engineered for Reliability
• IP67 Out of the Box
• Revolutionary FCC Licensing
• Gigabit Ethernet and Fiber Ports
• Colocation Synchronization
• GPS Location
• Smart Spectrum Management
• Smart Antenna Alignment

Redefining Licensed Backhaul

B11 Backhaul Radio

The Mimosa B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements. The B11 is fiber-ready—simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you are not quite ready for fiber, the B11 also comes with a standard gigabit power-over-ethernet connection.

We’ve simplified the licensing process and offer instant visibility into the FCC ULS database to quickly assess surrounding links, providing an early indication of coordination viability. A single B11 can support an entire 10.7 – 11.7 GHz band, maximizing your ability to find a clear, licensable channel. 

105 Gbps
Aggregate Speed
< 1 ms
Latency
100+ KM
Link Distances

BANDWIDTH CHANGES LIKE NIGHT & DAY

During peak evening hours, downloads and video streaming now represent nearly 90% of traffic, while daytime symmetric services and prioritized upstream traffic are as critical as ever to businesses. Legacy FDD radios are limited to symmetric traffic usage, leaving vast amounts of spectrum constantly underutilized. The B11, however, can dynamically adapt to bandwidth demand using Auto-TDMA technology, maximizing spectrum utilization throughout the day.

Superior Performance

Our speeds will blow you away. With up to 1.5 Gbps aggregate speed and under 1 ms latency, high performance has never been this affordable. The B11 has the lowest cost per Mpbs in the industry with link distances over over 100 km.

Monitor with Ease

Assessing link health and identifying potential problems has never been easier. Links are continuously monitored by our Mimosa Cloud service with rich data collection and analysis.

Night and Day

The B11 dynamically adapts to bandwidth demand using auto-TDMA technology, maximizing spectrum utilization throughout the day.

Right on Target

We’ve taken the guesswork out of antenna aiming by adding 2.4 GHz WiFi right in the radio, turning any smartphone into the most sophisticated aiming tool on the planet. You can instantaneously view radio details and target signal levels with the most precise aiming technology in the industry

Ultra Rugged

Carrier grade IP67 design allows the B11 to withstand the harshest of environmental conditions.

RIGHT ON TARGET

Now installers can both view radio details and target signal levels instantaneously with the most precise aiming technology available in the industry

PRECISION ENGINEERED FOR RELIABILITY

Licensed spectrum has always been preferred for its increased link reliability. Now, with the precision engineering of the B11, you can enjoy spectrum efficiency, incredible industry-leading stability, and for the first time groundbreaking dynamic bandwidth control.

ALL THE SIZES

From the shortest to the longest links, we can point you to all the antenna sizes* you need to properly license and coordinate your B11 links.

* Minimum dish sizes vary due to country specific regulations. 380mm antennas are not available for use in the US for the 10.7-11.7 GHz band.

Learn more

IP67 OUT OF THE BOX

IP67 OUT OF THE BOX The B11 is ready to withstand the elements right out of the box. It comes with an Ethernet and SFP* cage IP67 sealing gland, designed specifically for sealing pre-terminated cables. * Standard flexible conduit for connection to the supplied Fiber port sealing gland is not supplied as custom lengths are typically required.

RIGHT ON TARGET

In the past, aiming your antenna to find the best signal was more art than science. We’ve taken the guesswork out of antenna aiming by adding 2.4 GHz Wi-Fi right in the radio, turning any smartphone into the most sophisticated aiming tool on the planet! Now installers can both view radio details and target signal levels instantaneously with the most precise aiming technology available in the industry.


Gigabit Ethernet

10/100/1000-BASE-T

Dual Protocol Operation


: 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA; Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM

Smart Spectrum Management

Active scan monitors/logs ongoing RF interference across channels (no service impact); Dynamic auto-optimization of channel and bandwidth use. 

Security

128-bit AES PSK with hardware acceleration. 

Fiber Capable

SFP Cage included, Radio accepts either copper Ethernet or SFP but does not support simultaneous operation

Management Services

Mimosa cloud monitoring and management; SNMPv2 & Syslog legacy monitoring; HTTPS; HTML 5 based Web UI; 2.4 GHz 802.11b/g/n radio for local management access

Smart Antenna Alignment

Hands-free, dedicated 2.4 GHz, WiFi management radio alignment too

QoS : Supports 4 pre-configured QoS levels

GPS Location: GNSS-1 (GPS + GLONASS)

REVOLUTIONARY FCC LICENSING

Obtaining an FCC license is traditionally a lengthy, unpredictable process, exacerbated by microwave radios that support only a small fraction of the 10.7-11.7 GHz band.

As the first in the industry to do so, we radically simplified the licensing process, providing instant visibility into the FCC ULS database to quickly assess the surrounding links. We call this “pre-coordination,” giving you an early indication of coordination viability. We’ve also partnered with well-known license coordination experts to deliver low-cost coordination services. Taking it one step further, our single B11 radio can support the entire 10.7-11.7 GHz band, maximizing your ability to find a clear, licensable channel.

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.