Cisco AIR-AP1815W-D-K9 Access Point
The Cisco Aironet 1815w Access Point (Figure 1) offers a compact, wall plate–mountable access point, ideal for hospitality, cruise ships, residential halls, or other multiple-dwelling-unit deployments.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Product Introduction
The Cisco Aironet 1815w Access Point offers a compact, wall plate–mountable access point, ideal for hospitality, cruise ships, residential halls, or other multiple-dwelling-unit deployments.
Packing 802.11ac Wave 2 wireless support and Gigabit Ethernet wired connectivity into a sleek device, the 1815w is built to take full advantage of existing cabling infrastructure while blending into the visual footprint. This combination provides best-in-class performance while reducing total cost of ownership.
Features
Bluetooth 4.1
Integrated Bluetooth Low-Energy (BLE) 4.1 radio for location and asset tracking (future availability).
Increased wireless performance
The 1815w access point supports the latest 802.11ac Wave 2 standard for higher performance, greater access, and higher-density networks. With simultaneous dual radios and dual band with 802.11ac Wave 2 MU-MIMO functionality, this access point can handle the increasing number of high-bandwidth devices that will soon become a common part of the network.
Wired access
The 1815w allows wired access via a single RJ-45 10/100/1000 auto detection port. It supports full operation modes using PoE 802.3af power. The 1815w comes with three local Gigabit Ethernet ports, one uplink Gigabit Ethernet port, and one passive pass-through RJ-45 port, allowing for a variety of connections.
Mounting
This sleek access point with a small form factor is designed with flexible mounting options in mind. You can mount it directly on the wall or to numerous global wall junction standards. The access point is also easy to install.
Specifications
Model Number | AIR-AP1815W-B-K9 |
Authentication and security | Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2) 802.1X, RADIUS authentication, authorization and accounting (AAA) 802.11r 802.11i |
Software | Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later Cisco Mobility Express |
Maximum clients | Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point |
802.11ac | 2x2 single-user/multiuser MIMO with two spatial streams Maximal ratio combining (MRC) 20-, 40-, and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support |
Ethernet ports Authentication with 802.1X or MAC filtered | Dynamic VLAN or per port Traffic locally switched or tunneled back to wireless LAN controller |
Bluetooth (future Availability) | Integrated Bluetooth 4.1 (including BLE) radio Maximum transmit power: 4 dBm Antenna gain: 2 dBi |
Data rates supported | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps 802.11n data rates on 2.4 GHz 802.11ac data rates on 5 GHz |
Integrated antennas | 2.4 GHz, gain 2 dBi 5 GHz, gain 3 dBi |
Interfaces | 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (4-pin connector) Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af One passive pass-through port RJ-45 (back to bottom) |
Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
Dimensions (W x L x H) | Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm) |
Weight | Access point without mounting bracket or any other accessories: 10 oz (280 g) |
Environmental | Operating Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% (non-condensing) Max. altitude: 9843 ft (3,000 m) @ 40°C Non-operating (storage and transportation) Temperature: -22° to 158°F (-30° to 70°C) Humidity: 10% to 90% (non-condensing) Max. altitude: 15,000 ft (4,500 m) @ 25°C |
System | 1 GB DRAM 256 MB flash 710 MHz quad-core |