IC-F4261D-UL Transreceiver ICOM UHF

68,000.00 ₨ 68,000.00 ₨ 68000.0 NPR

68,000.00 ₨

This combination does not exist.

5 W Output Power Digital Radio for Hazardous Locations, IP-67, MIL-STD-810-C, -D, -E and -F,
The IC-F3261D-UL/F4261D-UL series can be used in Class I, Division 2, Group A, B, C and D hazardous locations approved by UL (Underwriters Laboratories). A full 5 W of output power is available with this approval. Other safety features such as man down, lone worker and emergency call functions help your team remain connected in hazardous locations.
Accessories with BP-232UL 2350mAh, MB-94R, FA-SC57U

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Product Introduction

The IC-F3261D-UL/F4261D-UL series provides 5 W output power and can be used in Class I, Division 2, Group A, B, C and D hazardous locations approved by UL (Underwriters Laboratories). The radios with man down, lone worker and emergency call functions help your team remain connected even in hazardous locations.

General Features

136–174, 350–400, 400–470, 450–512, 450–520 MHz versions
512 Channels / 128 Zones
Full dot-matrix display with status icons
Backlit LCD and buttons
16-position rotary selector and ON/OFF volume knob
800 mW loud and intelligible internal speaker audio
1000 mW audio from optional HM-184UL speaker-microphone
MIL-STD-810 G shock, vibration, temperature and more
IP67 dust-tight and waterproof, one meter for 30 minutes
DTMF autodial memories

More features includes

IP67 Dust-tight & Waterproof Protection

The IC-F3261D series provides rugged protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

Man Down and Lone Worker Functions for Emergency Call

The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatcher to any potential trouble.

800mW (typ.) Audio Output Power

The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

Built-in GPS Receiver

Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.

*Depending on the version.
*To show the received position data, an external PC application is required.

14-pin Accessory Connector

The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speaker - microphone provides a 1000mW (typ.) audio output for loud and clear communication.

Large Full Dot-Matrix LCD

Using a large full dot-matrix LCD (32 × 18mm), the IC-F3261D series shows two lines of easy to read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Long Lasting Battery Life Digital mode Analog mode

Built-in GPS type 10.5 hours (approx.) 11 hours(approx.)

Non GPS type 12 hours (approx.) 12.5 hours(approx.)

IDAS Features

The IC-F3261D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with NXDN™ Type-D multisite trunking. The following IDAS features are programmable.

-Individual/group call

-Individual ID and talkgroup ID memories

-Status message

-SDM (Short Data Message)

-GPS

-Stun, kill and revive

-Radio check

-Remote monitor

-Call alert

-Call log

-Emergency

-Digital voice scrambler

-Block decode

-RAN (Radio Access Number)

-Built-in 2-Tone and 5-Tone*

-2-Tone and 5-Tone signalings give you Selective calling, quiet stand-by and other convenient functions. The radio stun and kill functions disable a radio over the air and the revive function restores the stunned radio.

Specifications

Frequency coverage	136–174 MHz 400–470 MHz 450–512 MHz
Number of channels	512 channels/128 zones
Channel spacing	12.5/6.25kHz
Type of emission	11K0F3E/4K00F1E/F1D
Current drain(approx.)	Tx High (at 5W) 1.8A Rx Rated output 550mA Standby 160mA
Dimensions (W×H×D) (projections not included)	53.5×142.7×39.5 mm;2.11×5.62×1.56 in(With BP-232WP)
Weight (approx.)	400g; 14.1oz(With BP-232WP, MB-94R & FA-SC57U)

Transmitter

RF output power (at 7.5V DC)	5W, 2W, 1W(Hi, L2, L1)
Spurious emissions	78dB typ.
Frequency stability	±1.0ppm
Audio harmonic distortion	1.5% typ. (AF 1kHz 40% deviation)
FM Hum and Noise	40dB typ. (Narrow)
FSK error	2.0% typ.

Receiver

Sensitivity	Analog 0.23μV typ. (at 12dB SINAD) Digital 0.20μV typ. (at 5% BER)
Adjacent channel selectivity	68/60dB typ. (Narrow, digital)
Spurious response rejection	76dB typ.
Intermodulation rejection	75/66dB typ. (Narrow, digital)
AF output power(at 5% distortion)	800mW typ. (Internal SP, 12Ω load) 1000mW typ. (External SP, 8Ω load)